The Riffle is a collection of designs that take an open source approach to water monitoring, with the intent of making gathering water information easier and more accessible. It is part of Public Lab's Open Water Project.
For an overview of the design philosophy behind the Riffle, and what constraints and uses it was aimed at, see this wiki page.
Public Lab has supported development of an Arduino-compatible Riffle version - a datalogger enclosed in a water bottle. This is great, because the Arduino community is huge, and lots of knowledge and troubleshooting resources are now applicable to the Riffle project. (The first Riffle design was an ARM-based datalogger board enclosed in PVC)
Riffle Water Monitor Designs
By now, several instrument designs have been constructed around the Riffle, some of which of are described in an array of Github repositories:
- Openwaterproject -- the main organization on github
- riffle_328 -- hardware designs, instructions and software for getting started with the Riffle_328 datalogger
- riffle_328-conductivity -- Design considerations around conductivity
- riffle_328-depth -- Depth measurement circuit prototype
- riffle_328-turbidity -- Turbidity sensor prototype
- riffle_328-thermistor -- Connecting a thermistor to a Riffle
- riffle_328-i2c -- Connecting i2c sensors to a Riffle
- riffle_328-one-wire -- Connecting one-wire sensors to a Riffle
We've started to summarize some of the approaches to sensing water parameters like conductivity and turbidity:
Here are some activities the Public Lab community has conducted using the Riffle
|Riffle Beta project - Methane Gas Sensor||-||-||@Bob||-||-||0 replications: Try it »|
|Soaring Riffle||field-test||-||@cfastie||-||-||0 replications: Try it »|
|Compost is hot, says Riffle||field-test||-||@cfastie||-||-||0 replications: Try it »|
|In the heat of the pile||observe||-||@cfastie||-||-||0 replications: Try it »|
|Blink a LED - Write a 'Sketch' and build a breadboard circuit for the Riffle||build||review-me||@pdhixenbaugh||1h||medium||1 replications: Try it »|
|Riffle test 1||verify||-||@cfastie||-||-||0 replications: Try it »|
|Riffle campout||test-limits||-||@cfastie||-||-||0 replications: Try it »|
Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.
2017: A second small order of Riffle_328 boards was shipped on May 30th, and is on its way to the Public Lab kits department in Portland, Oregon. From there it will be sent to Public Lab community members who ordered them. The Riffle was available for pre-order until March 17.
2016: A small order of Riffle_328 boards arrived late April 2016, and were sent to Public Lab community members as a way of testing the design and informing further development.
How to get a Riffle Datalogger
The Riffle is open source, so if Public Lab is not currently offering it for sale, anyone can take the designs above to a PCB fabricator and have one made, copy and remix the design, or investigate other dataloggers.
The following dataloggers also have a real time clock and log to a micro SD card as the Riffle does. All of them are based on Arduino and will run more or less the same sketches. These are all open source hardware.
- EnviroDIY Mayfly Logger. Designed at the Stroud Water Research Center and commercially available through Amazon but currently out of stock (as of Feb 2017).
- Adafruit Feather M0 and Adalogger FeatherWing RTC + SD Add-on. These are two commercial products which snap together.
- Cave Pearl Project logger. Ed Mallon's design for a DIY data logger made from very inexpensive clone components (Arduino Pro Mini, SD card board, RTC board). Requires soldering and care.
- see more open source data loggers collected on the Data Logging page
|How do I install a bootloader on a Riffle data logger?||@warren||3 months ago||0|
|What would be a good basic activity to test out a data logging device in water?||@stevie||3 months ago||1|
|What are the differences between the Nano Data Logger and the Riffle?||@warren||3 months ago||1|
|What are some lessons learned using the Riffle? (Especially Underwater)||@pdhixenbaugh||6 months ago||0|
|How to use Alkaline Batteries with the Riffle?||@pdhixenbaugh||6 months ago||1|
|Question: purchase sensor||@frabisog||over 2 years ago||0|
All updates related to the Riffle
Since the Riffle is Arduino-compatible, here are also some Q&A for Arduinos in general:
The Riffle is also a part of a larger area on data logging. Here are some Q&A asked more generally:
|No matching content.|